I use al Gibraltar racks & fittings. They are the standard 1.5” steel tubing. You can use Tama, DW/Pacific, or other brands that have the same specs. I tried a lot of different things before coming up with, and refining this idea.

First you need a typical “S” hook from a hardware store. The ones I use are about 1.75” long. Then a short length of shrink tubing. This keeps things from having metal on metal contact. It works without the shrink tubing, but may rattle. Finally you need a standard Gibraltar memory clamp (not the heavy duty hinged one).

The first step is to put the shrink tubing on the hook and use a heat gun (or other heat source) to shrink it tightly.

Then you loosen the locking screw on the clamp, slip it through the S hook, and slide it on to the tube. Then move it where you want and tighten it down. I always turn it to the side where the Gong cord pulls from. That’s It!

Back